Conductor

Stranded, Circular, Plain /Tinned – BS 6360 Class 2.

Insulation

PVC (Polyvinyl Chloride)

Pairing

Two Insulated Cores Shall Be Uniformly Twisted Together To Form A Pair With Maximum Lay Length Of 100 Mm.

Pair Identification

Colour Code As Per BS-5308 Part-2 Individual Shielding : Each Pair Shielded With Aluminium Mylar Tape, Helically Applied With The Metallic Side Down In Continuous Electrical Contact With Annealed Tinned Copper Drain Wire Of 0.5mm2.

Assembly

Twisted Pairs Are Laid Up Together, If Necessary Interstices May Be Filled With Fillers Of Non-Hygroscopic Material Compatible With The Insulation.

Overall Shielding

Accumulated Pairs Again Overall Shielded With Aluminium Mylar Tape, Helically Applied With The Metallic Side Down In Continuous Electrical Contact With Annealed Tinned Copper Drain Wire Of 0.5mm2

Bedding /Inner Sheath

Extruded PVC .(For Unarmoured Cables: Inner Sheath To Be Provided Only If Required)

Armour

Galvanised Steel Round Wire/Flat Strip.

Unarmoured

Galvanised Flat Strip/Wire Is Not Provided

Outer Sheath

HR PVC/ FR /FRLS PVC Can Be Used For Outer Sheath To Suit A Variety Of Environment And Fire Risk Conditions.

Minimum Bending Radius

5XD(For Unarmoured); 6XD(For Armoured); D-Overall Diameter Of Cable(Mm)

Admissible Pulling Force (When Pulled With Pulling Eye)

Copper- 50N/Mm2